R & D Activities

Home / Department of Mechanical Engineering / R & D Activities

Research Publications

S. No.	Name of Faculty	Title of the Research Paper	URL	Name of Publication	Indexed
1	Dr. P. K. Mall	Analysis of microstructure and micro hardness of aluminum alloy melt for grain refinement by twin-roll casting	doi.org/10.1186/s40712-025-00211-0	Journal of Materials Science: Materials in Engineering	ESCI
2	Dr. P. K. Mall	Measuring the effects of liquid bulk viscosity numerically on a spherical nitrogen bubble in aqueous H2SO4	doi: 10.1063/5.0255985	AIP Advances	SCIE
3	Dr. P. K. Mall	Effect of liquid density, ultrasonic velocity, and gas flow rate on the formation of air bubbles in aqueous methanol at temperature 293.15, 303.15, and 313.15 K	doi: 10.1063/5.0251734	AIP Advances	SCIE
4	Dr. P. K. Mall	Impact of surface tension, viscosity and flow rate on air bubble formation in aqueous methanol at temperatures 293.15, 303.15 and 313.15 K	doi.org/10.1007/s11182-025-03508-x	Russian Physics Journal	SCIE
5	Dr. P. K. Mall	Analytical Modeling and Performance Analysis of Fuzzy and PID controller and full active suspension system using 7 degree of freedom	https://doi.org/10.20855/ijav.2026.31.1267	International Journal of Acoustics and Vibration	SCIE
6	Dr. P. K. Mall	Thermodynamic investigation on the use of transcritical carbon dioxide in a reheat gas turbine-based combined cooling and power cycle	https://doi.org/10.1007/s40819-026-00917-3	International Journal of Air-Conditioning and Refrigeration	SCIE
7	Dr. P. K. Mall	Integrated Effects of Aerodynamic Control and Active Suspension Systems on Vehicle Stability and Handling Dynamics During High-Speed Maneuvers	https://doi.org/10.20855/ijav.2025.30.44202	International Journal of Acoustics and Vibration	SCIE
8	Dr. P. K. Mall	Stepped single-slope solar still using MWCNT nanofluid and nano-enhanced PCM	https://doi.org/10.1007/s11182-026-03695-1	Russian Physics Journal	SCIE
9	Dr. P. K. Mall	Thermal and productivity analysis of a stepped single-slope solar still using silver nanofluid and nano-enhanced PCM	https://doi.org/10.1007/s11182-026-03698-y	Russian Physics Journal	SCIE
10	Dr. P. K. Mall	Experimental Studies on Tungsten Inert Gas Welding on EN-08 Steel with Mild Steel Filler	https://link.springer.com/chapter/10.1007/978-981-96-9521-8_50	Recent Advancement in Production Engineering (Scopus Conference)	SCOPUS
11	Dr. P. K. Mall	Review of Manual Scavenging in India and Design and Development of Scavenging Machine	https://doi.org/10.1063/5.0337741	AIP Conf. Proc. 3419, 050002 (2026)	SCOPUS
12	Dr. P. K. Mall	A Comprehensive Review of Roll Control and Ride Comfort Optimization of Active Suspension Systems for Passenger Vehicles	https://doi.org/10.1063/5.0337742	AIP Conf. Proc. 3419, 050001 (2026)	SCOPUS
13	Dr. P. K. Mall	Optimum utilization of Transport department with application of six sigma	https://doi.org/10.1063/5.0337745	AIP Conf. Proc. 3419, 050001 (2026)	SCOPUS
14	Dr. P. K. Mall	Experimental and numerical evaluation of various planes and axial velocity on static pressure from top to bottom of the cyclone separator	https://doi.org/10.1063/5.0337715	AIP Conf. Proc. 3419, 050001 (2026)	SCOPUS
15	Dr. Ankit Asthana	Mechanical, Surface and wear analysis of hybrid AA6082 reinforced with boron carbide and pistachio shell powder composite developed using stir casting technique	Has been accepted for publication in «Journal of Mechanical Engineering Science». Awaiting For Publication	«Journal of Mechanical Engineering Science» Awaiting For Publication	SCIE
16	Dr. Nagendra Kumar Mishra	Cyclic oxidation of 304L and 316L stainless steel coated and uncoated with Cr3C2-NiCr at elevated temperatures	doi:10.2478/msp-2025-0010	Materials Science – Poland	SCIE
17	Dr. Nagendra Kumar Mishra	Thermodynamic investigation on the use of transcritical carbon dioxide in a reheat gas turbine-based combined cooling and power cycle	https://doi.org/10.1007/s40819-026-00917-3	International Journal of Air-Conditioning and Refrigeration	SCIE
17	Dr. Jyoti Singh	Thermodynamic investigation on the use of transcritical carbon dioxide in a reheat gas turbine-based combined cooling and power cycle	https://doi.org/10.1007/s40819-026-00917-3	International Journal of Air-Conditioning and Refrigeration	SCIE
18	Ms. Garima Singh	Solar -powered villages: Empowering rural communities with solar energy	10.21844/16202118107	Purushartha Journal	SCOPUS

Research Publications

2020

Anil Kumar, Vivek Srivastava, N. K. Mishra,(2020) “Analysis of Oxidation Behavior on T-22 Boiler steel at 800°C Journal of Polymer & Composites ISSN: 2321-2810 (Online), ISSN: 2321-8525 (Print) Volume 8, Issue 1″pp 18-25.

2018

Anil Kumar, Vivek Srivastava, N. K. Mishra,(2018) “Comparative Study of Oxidation and Hot Corrosion Behovior of Uncoated and Detonation Gun Sprayed Cr3C2-25NiCr Coating on SA516 Boiler Steel at 800oC” , Journal of Aerospace Engineering & Technology , Vol. 8, No. 1, pp. 5-10.
Ravi Vishwakarma, Anil Kumar,(2018),”High temperature oxidation and Hot corrosion behaviour of detonation gun sprayed Al2O3-40%TiO2 coating in Air and salt on Inconel-600 at 800oC under cyclic condition”, International Journal of Scientific processes Research and Application(IJSPRA) ISSN 2454-5376, Volume-4, Issue 2(March-April 2018),pp.26-35.
Ravi Vishwakarma, Anil Kumar,(2018),”High temperature oxidation and Hot corrosion behaviour of detonation gun sprayed Al2O3-40%TiO2 coating in Air and salt on Inconel-600 at 800oC under cyclic condition”, International Journal of Scientific processes Research and Application. A Review(IJSPRA) ISSN 2454-5376, Volume-4, Issue 2(March-April 2018),pp.22-25.
Ravi Vishwakarma, Anil Kumar,(2018),”Cyclic Hot corrosion behaviour of Inconel-600(Ni-Cr Super Alloy) in Na2SO4+50%NaCl Molten Salty Environment at 800oC by detonation gun sprayed Al2O3+40%TiO2 coating,” International Journal for Scientific Research and development, Volume-6 Issue 3, 2018,ISSN 2321-0613.
Vivek Kumar Prajapati, Kamlesh Singh,(2018),”MRR and Surface Roughness of Al 6061 alloy on Milling Machine”,AReview,International Journal of Scientific processes Research and Application (IJSPRA) ISSN 2454-5376,Volume-4,Issue-3(May-June 2018),pp.01-08.
Vivek Kumar Prajapati, Kamlesh Singh,(2018),”To Optimization of MRR and Surface Roughness Oof Al 6061 alloy on Milling Machine by ANOVA based TAGUCHI method using MINITAB17 software,”International Journal of Scientific processes Research and Application(IJSPRA) ISSN 2454-5376, Volume-4,Issue-3(May-June 2018),pp.09-16.
Sateesh Kumar Singh, Shiv Kumar tripathi,(2018), “Mathematical Analysis of Static and dynamic Forces of Spur Gear Drive with High Contact Ratio” International Journal of Science and Research (IJSR) ISSN 2319-7064, Volume-7,Issue-6(June 2018),pp.1549-1552.
Vivek Kumar Prajapati, Kamlesh Singh “To Optimization Of Mrr And Surface Roughness Of Al 6061 Alloy On Milling Machine By Anova Based Taguchi Method Using Minitab17 Software” International journal of scientific processes research and application (IJSPRA) www.ijspra.com Volume 4, Issue 4(Nov-Dec 2015), pp.17-22
Sumit Kumar Pandey, Shiv Kumar tripathi,(2018),”Cyclic corrosion and oxidation of Inconel-600 in Molten salty Environment at 800 oC by D-gun Coating”International Journal of Science and Research (IJSR) ISSN 2319-7064, Volume-7,Issue-6(June 2018),pp.1556-1562.
ManojSoni, Shiv Kumar Tripathi,(2018),”Analysis Of Hardness Of MIG Disimilar Metals Mild Steel & Stainless Steel,”International Journal of Scientific processes Research and Application(IJSPRA) ISSN 2454-5376, Volume-4,Issue-3(May-June 2018),pp.20-23.
Anil Kumar, Vivek Srivastava, N. K. Mishra, (2018),”Comparative Study of Oxidation and Hot Corrosion Behovior of Uncoated and Detonation Gun Sprayed Cr3C2-25NiCr Coating on SA516 Boiler Steel at 800oC” , Journal of Aerospace Engineering & Technology , Vol. 8, No. 1, pp. 5-10.
Anil Kumar, Vivek Srivastava, N. K. Mishra, (2018), “Oxidation resistance of uncoated & detonation-gun sprayed WC-12Co and Ni-20Cr coatings on T-22 boiler steel at 900oC”, In IOP Conference Series: Materials Science and Engineering, vol377, no. 1, p. 012076 IOP Publishing.
Dharm Raj “Effect of Temperature On Fatigue Crack Propogation Under Constant Amplitude Loading” International Journal of Development Research (IJDR) ISSN:2230-9926, Volume 8,Issue 08,August 2018.
Sateesh Kumar Singh “Effect of Temperature On Fatigue Crack Propogation Under Constant Amplitude Loading” International Journal of Development Research (IJDR) ISSN:2230-9926, Volume 8,Issue 08,August 2018.